Hydraulic Machinery Valve Rubber Diaphragm Customized Oil Cylinder Rolling Diaphragm

Customized Oil Cylinder EPDM CR FKM Rolling Diaphragm Hydraulic Machinery Valve Rubber Diaphragm

• Oil Cylinder EPDM CR FKM Rolling Diaphragm​ Introduction:

• In the design of some medium and low pressure regulators, in order to solve the problem of unbalanced pressure regulator disc and improve the performance of the regulator, the method of installing a balanced diaphragm is often used. Installing a balancing diaphragm increases the differential pressure between the inlet and outlet pressures of the regulator. In the voltage regulator industry, it is called a balanced diaphragm in terms of use, and it is called a rolling diaphragm in rubber, instrumentation, machinery and other industries.

• Product Materials	NBR,NR,etc.
  Operating Temperature	-20℃~80℃
  Service Life	≥1000000 times
  Usage Scenario	Gas pressure regulator

  
  (1) There should be no straight edges and corners at the corners of the diaphragm, and arcs should be made to avoid easy fracture after folding and loss of glue during vulcanization. The intersection of the inner wall of the sleeve and the end face should also be poured with arc angles to avoid sharp corners, piece.
  (2) Diaphragm material: nitrile rubber is used for natural gas and LPG, and chlorohydrin rubber is used for gas.
  (3) There is an elastic polyester cloth interlayer in the diaphragm. Carefully observe the inner and outer surfaces of the diaphragm. One side can vaguely see the pattern of the mesh cloth, and the other side is a smooth surface. The smooth surface is required to be the pressure surface of the gas. Therefore, For the diaphragm installed in the forward direction, the smooth surface is on the inner surface of the diaphragm, and the smooth surface of the diaphragm installed in the reverse direction is on the outer surface, which can avoid leakage and improve the compressive strength of the diaphragm.

• Oil Cylinder EPDM CR FKM Rolling Diaphragm Material details:

• For the present, common materials for rolling diaphragm are: natural rubber (NR), nitrile butadiene rubber (NBR), the performance of the two materials can meet the needs of most industrial environments. In special industrial environments (high temperature resistance, acid and alkali resistance) could use EPDM, fluorine rubber (FKM), neoprene rubber (CR) for production, but the cost is relatively high.

Oil Cylinder EPDM CR FKM Rolling Diaphragm ​Specifications:

Hongum supply various of rubber diaphragms, dampers and all kinds of other rubber and plastic hardwares for boat, yacht, wharf and sea farm industries, such as marine float, fast ray paddle, and other boat and wharf rubber and plastic accessories.

• Our service:

1. Packaging is neutral packing or customized packing.

2. We will reply you within 24 hours.

3. We will also provide you with good after-sales service.

4. OEM or ODM orders are welcomed.

5. Trial orders are acceptable.

6. High quality and factory price.

7. 100% ensured the quality.

Customized Oil Cylinder Rolling Diaphragm

CR Rolling Diaphragm Seal

Hydraulic Machinery Valve Rubber Diaphragm

Hydraulic Machinery Valve Rubber Diaphragm Customized Oil Cylinder Rolling Diaphragm Images